Handheld Personal Home Portable Ultrasonic Nebulizer for Kids and Adults
1.Sterilize the water vessel,top cover,mouthpiece and mask with boiling water or 75% medical alcohol before use.
2.Turn the top cover of the water vessel anticlockwise to remove it from the vessel.
3.Carefully measure the liquid as instructed by your physician or professionals and put them into the water vessel.
4.Tighten the water vessel cover and attach other parts like the mouthpiece and mask to the inhaler based on your need.
5.Press and hold the switch button for 5 seconds, the green light turns blue to indicate the inhaler is on the largest amount( about 0.8ml/min)of atomization for a 5-minute treatment.
6.Peress the swich button again, the green light flashes to indicate the minimum amount(about 0.4ml/min) of atomization for a 10-minute treatment.
7.Please wash the instrument with clean water for 3-5 minutes before use to get the best amount of atomization.
8.When charging,the blue light will flash,when the blue light turns green,the inhaler if fully charged.
9.Then inhaler cannot be started or automatically shut down after startup in a low voltage
10.When the treatment is over,the inhaler will automatically turn off.
11.Wash the water vessel,top cover,mouthpiece and mask with water and air dry them for your next treatment.
Ultrasonic frequency: 115 MHz
-Konsumsi Power: 2w
-Kapasitas Cup: 25 ml
-Size Particles: 5 micrometre (um) approx
-Power Supply: rechargeable battery
1 x Ultrasonic Inhaler (the original retail package)
2 x mask (1 * adult size, 1 * pediatric size)
2 x pieces of mouth
1 x USB charger
1 x Free English manual